Inqury

Please choose the best way contact us online!

Wheel Bucket Sand Washing Machine

Working Principle of Sand Washing Machine

The electric motor runs slowly with the impellor after decelerated by the belt, decelerator and gears wheel. The sand and stone flow into washing launder from feeding launder, rolls with the impellor, and grinds each other. The impurity covering the sand is washing away. At the same time, add more water, the strong water flow will take away waste and some low-weight wastes from washing launder. Through the above process, the washing function is finished. The clean sand and stone is lift up by vane. When it goes up slowly, the water begins to drop through the mesh and fall back in the washing launder. On one hand, water is removed from the sand and stone; on the other hand, the water can be fully used. Finally,the sand and stone goes to the out launder from the rotary impellor to finish the washing task.

[bucket diameter]: 2600mm-4500mm
[processing capacity]: 30-250 T / h
[application scope]: This machine is widely used for washing materials in industries such as gravel field, mine, building materials, transportation, chemical industry, water conservancy and hydropower, concrete mixing station, etc.
[product introduction]: the wheel bucket sand washing machine is an efficient sand washing equipment developed according to the actual situation of the domestic sand equipment industry. It has the characteristics of high cleaning degree, reasonable structure, large output and less sand loss in the process of sand washing.
Introduction of wheel bucket sand washing machine:
The wheel bucket sand washing machine is also called water wheel sand washing machine. It adopts advanced technology and combines with the actual situation of domestic sand industry to develop high-efficiency sand washing equipment. It has less vulnerable parts, reasonable structure, large output and less sand loss in the process of sand washing, especially its transmission part is isolated from water and sand, so its failure rate is much lower than the current common sand washing machine, which is the upgrade of domestic sand washing industry. The choice of the new generation.
Photo of bucket wheel sander in stock:

Performance characteristics of wheel bucket sand washing machine:
The wheel bucket sand washing machine is characterized by simple structure, stable operation, clean sand washing and high output. It is widely used in construction site, gravel field, glass factory, power station, concrete preparation stone, electrical engineering and other departments.
1. The structure of the machine is simple, and the impeller drive bearing device is isolated from water and water receiving materials, which greatly avoids the bearing damage caused by water immersion, sand and pollutants.
2. Compared with the traditional spiral sand washing machine, it has obvious advantages when it is used for sand washing in the sand and stone field.
A. there is little loss of medium and fine sand and stone powder, and the gradation and fineness modulus of washed construction sand meet the national standards of “construction sand”, “pebble and gravel for construction”.
B. There are almost no wearing parts except screen.
C. long service life, no maintenance for a long time.
Working process of sand washing machine (sand washing machine)
No matter the wheel type or the spiral type, it is composed of triangle belt, reducer, gear wheel, impeller, washing tank, etc. When the sand washing machine starts to work: the motor drives the V-belt, gear and reducer, and then the gear drives the impeller to rotate. The sand and stone roll in the washing trough driven by the impeller, and grind each other to remove the impurities covering the surface of the sand and stone. The clean sand and stone are taken away by the blades. Finally, the sand and stone are poured into the discharging trough from the rotating impeller to complete the cleaning.
Spiral sand washing machine: the sand washing process of the spiral sand washing machine is slightly different from that of the wheel type sand washing machine. The sand is continuously grinded by itself during the spiral driving process of the spiral sand washing machine to separate the sediment. Due to the different material quality and the different settling speed in the water, the sediment is separated. The mechanical sand washing machine has a high cleaning rate and is widely used for energy and water saving.
The advantages of wheel washing machine and spiral washing machine are complementary. The spiral sand washing machine has the characteristics of stable operation, clean sand washing, energy saving and water saving. The wheel type sand washing machine has the advantages of simple operation, long service life and wide use.
Working principle of wheel bucket sand washing machine:
During operation, the motor drives the impeller to rotate slowly after decelerating through the V-belt, reducer and gear. The sand and gravel enter into the washing tank, roll under the drive of the impeller, and grind each other to remove the impurities covering the surface of the sand, and destroy the water vapor layer covering the sand, so as to facilitate dehydration; meanwhile, add water to form a strong water flow, and timely take away the impurities and foreign matters with small specific gravity. And discharge from the overflow outlet washing tank to complete the cleaning function. The clean sand is taken away by the blade, and finally the sand is poured into the discharge chute from the rotating impeller to complete the cleaning function of the sand.
Technical parameters of wheel bucket sand washing machine:

Technical Parameter:

Modle XS2600 XS2800 XS3000 XS3200 XS3600 XS4500
Diameter(mm) 2600 2800 3000 3200 3600 4500
Speed(r/min) 2.5 1.8 1.7 1.44 1.21 1
****Feeding Granularity(mm) ≦10 ≦10 ≦10 ≦10 ≦10 ≦10
Processing Capacity(t/h) 30-60 50-70 70-100 80-120 120-180 180-250
Motor Power(kw) 5.5 5.5 7.5 11 15 22
Size(mm)
(L)
(W)
(H)
3200
2270
2672
3700
2500
2990
3900
2700
2990
3965
3150
3300
4355
3400
3700
5155
3750
4600

Note: the above technical parameters are for reference only, our company can customize products according to the actual situation of users.

Henan Victory Machinery Co., Ltd.

  • No. 26 Dongqing Street, High-tech district, Zhengzhou, Henan, China
  • +86-13353772661

    Technical Parameter:

    Modle XS2600 XS2800 XS3000 XS3200 XS3600 XS4500
    Diameter(mm) 2600 2800 3000 3200 3600 4500
    Speed(r/min) 2.5 1.8 1.7 1.44 1.21 1
    ****Feeding Granularity(mm) ≦10 ≦10 ≦10 ≦10 ≦10 ≦10
    Processing Capacity(t/h) 30-60 50-70 70-100 80-120 120-180 180-250
    Motor Power(kw) 5.5 5.5 7.5 11 15 22
    Size(mm)
    (L)
    (W)
    (H)
    3200
    2270
    2672
    3700
    2500
    2990
    3900
    2700
    2990
    3965
    3150
    3300
    4355
    3400
    3700
    5155
    3750
    4600

    Note: the above technical parameters are for reference only, our company can customize products according to the actual situation of users.

    Welcome visit our factory…

    Henan Victory Machinery Co., Ltd.

    • No. 26 Dongqing Street, High-tech district, Zhengzhou, Henan, China
    • +86-13353772661

      Welcome visit our factory…