Vertical Shaft Impact Crusher

Inqury

Please choose the best way contact us online!

Vertical Shaft Impact Crusher

VSI series vertical shaft impact crusher is a new type of sand making and crushing equipment with many national patent technologies, absorbing many years of research and development experience and technical concept, adopting new four port impeller design structure and special sealing structure to prevent oil leakage of bearing barrel, etc., which has the characteristics of energy saving, long service life and wide application, and helps the large sand field gradually move towards large-scale and centralized production. To meet the national requirements for environmental protection and production capacity.
Application: metal and non-metal ores, building materials, artificial sand making, metallurgical slag
Materials: pebble, granite, basalt, iron ore, limestone, calcite, quartzite, diabase, coal, calcium carbide, etc.

Outstanding advantages
Brand new design
The impeller structure adopts a new four port design to improve the material throughput, and the crushing efficiency of the same material with three port impeller is increased by about 20%.
Process upgrading, cost reduction and efficiency increase
The “stone striking” working mode is adopted to reduce the types of wear-resistant use and the production cost of customers; the structure and process of the impeller part are adjusted to increase the service life of the impeller part by 30-200% compared with the previous equipment under the condition of crushing the same material.
Special design, quality assurance
The transmission part of the equipment adopts special sealing structure to prevent oil leakage of the bearing barrel, which has won many national patents; the bearings adopt imported bearings to reduce the transmission system failure.
Easy maintenance
The newly added lifting device is convenient for customers to maintain the equipment and save labor and effort in maintenance; the simple substructure design of the machine body effectively prevents the blocking of the lower part of the machine body when the material moisture content is too large, reduces the downtime and operation.

Working principle
The motor drives the main shaft of the bearing barrel drive part to rotate at high speed. At the same time, the rotor rotates at high speed along with the main shaft. The materials entering the impeller are accelerated by the impeller and then sprayed into the crushing chamber. They collide with the lining materials formed in the crushing chamber and grind with each other. After accelerating the materials, the kinetic energy is obtained and converted into the energy required for crushing or shaping materials. The materials circulating in the crushing chamber for many times are in the circumference. Under the action of surrounding gas eddy current, it is broken and shaped for many times, so as to realize continuous crushing and shaping of materials, and discharge from the lower part of the machine body to form the required finished materials. This crushing method is “stone striking”, which is mainly applied to shaping and crushing of stones. In addition, this equipment is equipped with “stone striking” crushing method, which is different from stone striking: after the materials are ejected from the rotor, they are The impact block installed in the crushing chamber is impacted to accelerate the energy obtained by the material into the energy required for collision and crushing with the impact block. After the impact, the material is directly discharged from the lower part of the body, which can not achieve multiple cycles of crushing in the crushing chamber. This crushing method is mainly applicable to the working occasions with crushing as the main purpose (to provide a large crushing ratio).

Technical Parameter

Modle Sand Making  Shaping Sand Making Shaping Spindle Speed(r/min) Motor Power
(kw)
Feed Size(mm) Throughput(t/h)
VSI1263 ≤50 ≤60 454-486 545-583 900-1200 315×2
VSI1150 ≤45 ≤55 344-368 413-442 1000-1300 250×2
VSI1040 ≤40 ≤50 264-283 317-342 1100-1400 200×2
VSI9026 ≤35 ≤45 167-179 200-215 1200-1500 132×2
VSI8018 ≤30 ≤40 109-117 131-140 1300-1700 90×2

Any change of technical data shall not be advised additionally.

Henan Victory Machinery Co., Ltd.

  • No. 26 Dongqing Street, High-tech district, Zhengzhou, Henan, China
  • +86-13353772661

    Technical Parameter

    Modle Sand Making  Shaping Sand Making Shaping Spindle Speed(r/min) Motor Power
    (kw)
    Feed Size(mm) Throughput(t/h)
    VSI1263 ≤50 ≤60 454-486 545-583 900-1200 315×2
    VSI1150 ≤45 ≤55 344-368 413-442 1000-1300 250×2
    VSI1040 ≤40 ≤50 264-283 317-342 1100-1400 200×2
    VSI9026 ≤35 ≤45 167-179 200-215 1200-1500 132×2
    VSI8018 ≤30 ≤40 109-117 131-140 1300-1700 90×2

    Any change of technical data shall not be advised additionally.

    Welcome visit our factory…

    Henan Victory Machinery Co., Ltd.

    • No. 26 Dongqing Street, High-tech district, Zhengzhou, Henan, China
    • +86-13353772661

      Welcome visit our factory…