1. All vulnerable parts of rotor disk shall be equipped with wear-resistant retainers. High strength bolts with yield strength of grade 10.9 up to 640mpa and tensile strength of 800MPa shall be used uniformly. They are wear-resistant, impact resistant and easy to replace and maintain.
2. The hammer disk is designed with eight hammer shaft holes and four spare ones. The hammer shaft hole is embedded with tungsten alloy steel shaft sleeve, greatly extending the service life of rotor disk.
3. The belt pulley is connected with the main shaft by the expansion sleeve, which is more antiskid than the traditional key connection.
4. The hammer head can rotate 360 degrees around the hammer shaft, avoiding the direct impact between the hammer head and the spacer during the turning process, and protecting the hammer shaft from fracture.
5. The production of hammerhead has modern casting workshop and spectrum analyzer, and the most advanced composite hammerhead is adopted. The handle of hammerhead is impact resistant and the head of hammerhead is wear-resistant.
No castor bar design, adjustable discharge, one break molding instead of ezuo + counterattack
Compared with the traditional hammer, the new high resistance adopts a unique non castor bar design. By adjusting the distance between the movable counter plate and the rotating track circle of the hammer head on the rotor, the size of the discharge particle size is adjusted, which greatly reduces the powder discharge rate, greatly reduces the dust, and is more environmentally friendly and practical. The feeding port is large enough to eat large amount of materials, and it also has the function of anti breaking and shaping. One machine can replace e breaking + anti breaking. At the same time, the wet material can be broken without affecting the production in rainy days, which solves the problems of traditional hammer breaking, easy blocking, and low output.

Digital processing, more accurate blanking
New high resistance introduces a number of h-powermax105 plasma cutting machines of American Haibao to conduct digital cutting and processing, computer control, digital cutting and more accurate
4 kinds of impact boards, 3-stage crushing, more perfect particle shape
The arc-shaped shell has a through bar structure, the reaction plate is fixed with goose eggs, the side lining plate is fixed with 10.9-grade cubes, and the shell is firm and not easy to deform. Four kinds of lining plates are used for internal reaction plate: flat lining plate, corrugated lining plate, serrated lining plate and movable lining plate. When the flat lining plate is at the machine mouth, the impact force of large materials entering the crusher mouth is large, which effectively protects the shell. Corrugated lining plate is used in the crushing area, sawtooth lining plate is used in the shaping area to shape the stone, and movable lining plate is used in the shaping area, with self flow design, perfect grain shape, avoiding repeated crushing, and achieving automatic discharge of grain shape.